90mm 90mm

Download: 1:1 SCALE PRINTABLE CORNICE PROFILE OF SR P5 - In Stock Cornice

Printing tips to ensure printing of this cornice is to scale

In print properties, ensure print quality is not set to DRAFT.
In print settings, ensure page scaling is set to NONE.

How to find a match from our range for your existing cornice

Print off the cornice that you think best matches the cornice you have.
If you have a cornice sample piece, stand that on end on top of the printed profile to see if they match.
if the cornice is still in place on the ceiling, put a small saw-cut from ceiling to wall, then slot a piece of cardboard into the saw-cut and trace the shape with a pen. Cut out and compare the traced shape with the printout from the website.

If you have a match, simply Contact Us. Please note. Any cornice can be re-produced to match if you cannot find an exact match from our existing range.

No plaster products are returnable or refundable
Plaster products should be chosen with consideration given to room size and ceiling height.
All measurements are approximate and subject to change without notice.
Cornices available in 4.8, 4.2 and 3.6 LM lengths otherwise stated.
All cornices can be made to suit curved walls.

SR P5 - In Stock Cornice

Item No. SR P5 - INSTOCK

39501

Category: / In Stock Products / In Stock Cornices

Now $11.80 per LM

Was ~~$13.60~~

Features

Ceiling: 90

Wall: 90

Max Ceiling Height: 2.70

Min Ceiling Height: 2.40

View SR P5 - In Stock Cornice