- Home
- In Stock Products
-
Products
- In Stock Products
- Cornices
- Strips
- Arches
- Acoustic Pods
- Arch Keystones
- Arch Plinths
- Bosses
- Ceiling Roses
- Ceiling Domes
- Coffered Ceiling Panels
- Ceiling Panels
- Columns
- Corbels
- Cornice Mitre Blocks
- Embellishments
- External Staffs
- Fireplaces
- Light Pelmets
- Light Sconces
- Medallions
- Pediments
- Pilasters
- Pilaster Capitals
- Strip Corners
- Vents
- Wall Niches
- Wall Panels
- Wall Plaques
- Plaster Accessories
- Periods Timeline
- Specialising In
- Installation
- Galleries
- FAQ's
- Blog
- Locations
- Contact
AS62
Printing tips to ensure printing of this cornice is to scale
- In print properties, ensure print quality is not set to DRAFT.
- In print settings, ensure page scaling is set to NONE.
How to find a match from our range for your existing cornice
- Print off the cornice that you think best matches the cornice you have.
- If you have a cornice sample piece, stand that on end on top of the printed profile to see if they match.
- if the cornice is still in place on the ceiling, put a small saw-cut from ceiling to wall, then slot a piece of cardboard into the saw-cut and trace the shape with a pen. Cut out and compare the traced shape with the printout from the website.
If you have a match, simply Contact Us. Please note. Any cornice can be re-produced to match if you cannot find an exact match from our existing range.
- No plaster products are returnable or refundable
- Plaster products should be chosen with consideration given to room size and ceiling height.
- All measurements are approximate and subject to change without notice.
- Cornices available in 4.8, 4.2 and 3.6 LM lengths otherwise stated.
- All cornices can be made to suit curved walls.
20mm
40mm